Meterboxes

WHY USE DANWELL insulated water Meterboxes?

DANWELL insulated water Meterboxes protect the meter and all other inside tecnical installation from frost.

WATER METER BOXES INSTALLATION:
In Denmark it is mandatory that every consumer should have water Meterboxes. These water Meterboxes should be installed in a way allowing easy access.

 Due to the fact that many consumers are absendt during the day, the water Meterboxes has to be installed at the boarder of the
property and the public road allowing closure of the water supply for any necessary repair of the pipe line or for any
eventuel installation of tapping tees. It also allows the community to read the water consumption at any time.

Advantage of Meterboxes being installed outside of the house:

1. After the water Meterboxes is every house responsibility.
2. Controls or repairs of water Meterboxes can be made during absence.
3. Note of consumption can be made duing absence.
4. Installatin of tapping tees for further consumers can be made.
5. In case of any leakages, fast repairs can be made without wasting water and avoiding that drinking water enters into
  the ground.

Disadvantage of outside installation: Frost!

Discount Model
 Internal diameter of chamber: 500 mm
Internal diameter of opening: 400 mm
Depth of insulted chamber: 700 mm
Total depth incl. bottom pipes and cover: 1150 mm. possible +450 mm
Materials: HDPE polyethylene and polypropylene.
Colour, outer skin: Black, ( UV stabilising Carbon Black ).
Colour, inner skin: Blue.
Colour, bottom pipes: Blue.
Main Chamber: Double skin construction, welded top and bottom, with moulded insulating core.
Insulating material: Moulded expanded polystyrene.
Bottom pipe: Polypropylene with strengthening ribs construction and cutouts for earthing pipes.
Fixing ring for valves and meters: Universal fixing ring that can be fitted at the required depth in the chamber. Four screws lock the ring to the inner face of the chamber.
Environmentally friendly: All materials can be recycled without environmentel damage.
Installation: Assemble Meterboxes, valves and couplings joined with stainless plates, fit the four stainless bolts throungh the plates and fixing ring, connect earthing pipe to couplings, place the chamber over the fixing ring and support at the required depth. Finally, tighten the four screws against the wall and fix the cover ( with locking device if required ).
 
Optional surface ring: The chamber is fitted with eight rebates for a surface ring which can be fitted to raise the cover to ground level. Surfacing can be laid up to the ring for unhindered access
to the cover of the Meterboxes.