Watermeterboxes: DANWELL insulated watermeterboxes protects the meter and all other inside tecnical installation from frost.

WHY USE DANWELL Insulated Watermeterboxes?

Watermeterboxes INSTALLATION:
In Denmark it is mandatory that every consumer shold have Watermeterboxes.  Due to the fact that many consumers are absendt during the day, the Watermeterboxes has be installed at the boarder of the
property and the public road allowing closure of the water supply for any necessary repair of the pipe line or for any
eventuel installation of tapping tees. Watermeterboxes also allows the community to read the water consumption at any time.

Advantage of Watermeterboxes being installed outside of the house:

1. After the Watermeterboxes is every house responsibility.
2. Controls or repairs of Watermeterboxes can be made during absence.
3. Note of consumption can be made duing absence.
4. Installatin of tapping tees for further consumers can be made.
5. In case of any leakages, fast repairs can be made without wasting water and avoiding that drinking water enters into
  the ground.

Disadvantage of outside installation: Frost !

Discount Model
 Internal diameter of chamber: 500 mm
Internal diameter of opening: 400 mm
Depth of insulted chamber: 700 mm
Total depth incl. bottom pipes and cover: 1150 mm. possible +450 mm
Materials: HDPE polyethylene and polypropylene.
Colour, outer skin: Black, ( UV stabilising Carbon Black ).
Colour, inner skin: Blue.
Colour, bottom pipes: Blue.
Main Chamber: Double skin construction, welded top and bottom, with moulded insulating core.
Insulating material: Moulded expanded polystyrene.
Bottom pipe: Polypropylene with strengthening ribs construction and cutouts for earthing pipes.
Fixing ring for valves and meters: Universal fixing ring that can be fitted at the required depth in the chamber. Four screws lock the ring to the inner face of the chamber.
Environmentally friendly: All materials can be recycled without environmentel damage.
Installation: Assemble meter, valves and couplings joined with stainless plates, fit the four stainless bolts throungh the plates and fixing ring, connect earthing pipe to couplings, place the chamber over the fixing ring and support at the required depth. Finally, tighten the four screws against the wall and fix the cover ( with locking device if required ).
 
Optional surface ring: The chamber is fitted with eight rebates for a surface ring which can be fitted to raise the cover to ground level. Surfacing can be laid up to the ring for unhindered access
to the cover.
 
 

meterboxes
... Watermeterboxes ... Danwell

Insulatedcover
Constrution and manufacture: The insulatedcover is designed, constructed and produced in Denmark.

Water Meter Box
In Denmark it is mandatory that every consumer shold have a Water Meter Box.

Reading water meters
By reading water meters at the beginning and the end of the day you can compare the two totals tell how much water you and your family used.

Meterbox
In case of any leakages of the meterbox, fast repairs can be made without wasting water.

Water Meter Boxes
DANWELL insulated Water Meter Boxes protect the meter and all other inside tecnical installation from frost.

Insulated water box
This insulated water box should be installed in a way allowing easy access.

Hershey water meter
DANWELL insulated Hershey water meter box protects the meter and all other inside tecnical installation from frost.

Water meterbox
Controls or repairs of water meterbox can be made during absence.

Water meterbox
In Denmark it is mandatory that every consumer shold have a water meterbox. This water meterbox should be installed in a way allowing easy access.

Insulated meter box
DANWELL insulated meter box protects the meter and all other inside tecnical installation from frost.

Water meter cover
The water meter cover is a registered utility model under Danish patent legislation.

Insulated boxes
Insulated boxes allow the community to read the water consumption at any time.

Insulated meterbox
DANWELL insulated meterbox protects the meter and all other inside tecnical installation from frost.

PE cover
The PE cover is designed, constructed and produced in Denmark. The PE cover is a registered utility model under Danish patent legislation.

Meterboxes
DANWELL insulated water meterboxes protect the meter and all other inside tecnical installation from frost.