Insulated water meter boxes – made in Denmark

Danwell

Bjerrevej 104

DK-8700 Horsens, Denmark

Technical information

Home

Technical information

Questions?

Contact us if you have any questions about installation or insulation. We are happy to help.

Contact us
Danwell water meter box

Facts about installation, insulation and assembly

Here you will find the background for outdoor water meter boxes, the calculated insulation values, the assembly guide and our leaflets.

Why install the water meter outdoors?

In Denmark, every consumer must have a water meter, and it must be easy to access. Because many consumers are away during the day, the meter is installed at the border between the property and the public road. This allows the water supply to be closed for pipe repairs or for installing tapping tees, and the community can read the consumption at any time.

Clear responsibility

The homeowner is responsible for the installation after the water meter.

Inspection and repair

Can be carried out when nobody is home.

Meter reading

Consumption can be read when nobody is home.

More consumers

Tapping tees for further consumers can be installed.

Fast repair of leaks

Without wasting water and without drinking water seeping into the ground.

Insulation values

The insulating material has a density of 20 kg/m³. The figures apply at 0 °C and are calculated beneath the cover only – including the cover, insulation is considerably better. Thermal conductivity: 0.032 W/m °C (HDPE: 0.35 W/m °C).

K1: Cover – insulating value 4.44 m² °C/W, K-value 0.22 W/m² °C. Corresponds to 173 mm mineral wool.
K2: Conical part (avg.) – insulating value 2.06 m² °C/W, K-value 0.48 W/m² °C. Corresponds to 80 mm mineral wool.
K3: Vertical part (avg.) – insulating value 1.43 m² °C/W, K-value 0.70 W/m² °C. Corresponds to 55 mm mineral wool.

Temperature charts

The charts show the calculated air temperature in the middle of the box for Danlaag with PE pipes (corrugated, Ø 400 mm inside) buried 1.2 m in the ground. The calculation was made with a DTI computer program, but DTI is not responsible for the calculated figures and curves. The curves show the average of a cold and a normal year (average 1953–1992). Positive temperatures in the box come from ground heat and the water pipes. View the temperature chart (PDF).

Assembly guide

The insulated water meter box is easy to assemble and install. Follow the photo series step by step.

Assembly guide, step 1 Assembly guide, step 2 Assembly guide, step 3 Assembly guide, step 4 Assembly guide, step 5 Assembly guide, step 6 Assembly guide, step 7 Assembly guide, step 8 Assembly guide, step 9 Assembly guide, step 10 Assembly guide, step 11 Assembly guide, step 12 Assembly guide, step 13 Assembly guide, step 14 Assembly guide, step 15 Assembly guide, step 16

Leaflets in your language
Download our leaflet (PDF) in English, German, French, Russian, Turkish, Czech, Slovenian, Polish, Dutch, Georgian.

Download English leaflet (PDF)